1 1

Huntsman Jeffamine D-230 Polyetheramine Curing Agent

Huntsman Jeffamine D-230 Polyetheramine Curing Agent

D230 - 32oz

$55.00 USD
$55.00 USD
Sale Sold out
Size
Request Long Term Contract

Jeffamine D-230 Polyetheramine is characterized by repeating oxypropylene units in the the backbone.  Jeffamine D-230  polyetheramine is a difunctional, primary amine with an average molecular weight of about 230.  The primary amine groups are located on secondary carbon atoms at the end of the aliphatic polyether chain.

--Polyoxypropylenediamine--  CAS# 9046-10-0

Call for pricing on a 55lb drum

Applications:

  • Epoxy curing agent
  • Reacts with Carboxylic Acids to form hot melt adhesives
  • Reacts quickly with isocyanates
  • Salts may be formed readily for surfactant use

Benefits:

  • Low viscosity, color and vapor pressure
  • Completely miscible with a wide variety of solvents, including water
  • Provides tough, clear, impact resistant coatings, castings and adhesives
  • Coatings are free of surface blush prevalent with many amine curing agents

  

Property Specifications Test Method
Appearance Colorless to pale yellow liquid with slight haze permitted ST-30.1
Color, Pt-Co 25 max. ST-30.12
Primary amine, % of total amine 97 min. ST-5.34
Total acetylatables, meq/g 8.3-9.1 ST-31.39
Total amine, meq/g 8.1-8.7 ST-5.35
Total amine, % acelylatables 94.0 Min. Calculated
Water, wt% 0.20 max.

ST-31.53, 6

 

Typical Properties

 AHEW (Amine hydrogen equivalent wt.), g/eq 60
Equivalent wt. with isocyanates, g/eq 120
Viscosity, cSt, 25° C (77°F) 9.5
Density , g/ml (lb/gal), 25° 0.948 (7.90)
Flash point, PMCC, °C (°F) 121 (250)
pH, 5% aqueous solution 11.7
Refractive index, ⁿD²° 1.4466
Vapor pressure, mm Hg/°C 1/100
10/133

 

The Epoxy Resin Store warrants only that its products meet the specifications stated herein Typical properties, where stated, are to be considered as representative of current production and should not be treated as specifications. While all the information presented in this document Is believed to be reliable and to represent the best available data on these products, NO GUARANTEE, WARRANTY, OR REPRESENTATION IS MADE, INTENDED, OR IMPLIED AS TO THE CORRECTNESS OR SUFFICIENCY OF ANY INFORMATION, OR AS TO THE SUITABILITY OF ANY CHEMICAL COMPOUNDS FOR ANY PARTICULAR USE, OR THAT ANY CHEMICAL COMPOUNDS OR USE THEREOF ARE NOT SUBJECT TO A CLAIM BY A THIRD PARTY FOR INFRINGEMENT OF ANY PATENT OR OTHER INTELLECTUAL PROPERTY RIGHT. EACH USER SHOULD CONDUCT A SUFFICIENT INVESTIGATION TO ESTABLISH THE SUITABILITY OF ANY PRODUCT FOR ITS INTENDED USE. Products may be toxic and require special precautions in handling For all products listed, user should obtain detailed Information on toxicity, together with proper shipping, handling and storage procedures, and comply with all applicable safety and environmental standards.

Technical Specifications

Mix ratios, coverage rates, cure times, and physical properties are included with each product. Contact us for full Technical Data Sheets (TDS).

Application Instructions

Surface must be clean, dry, and properly profiled. Temperature range: 60–85°F. Relative humidity below 85%. See individual product guidelines for specific application methods, mixing procedures, and recoat windows.

Shipping & Handling

Orders ship within 1–2 business days via ground freight. Epoxy resins and coatings ship as non-hazardous. Pigments and powders ship standard ground. Free shipping available on qualifying orders — contact us for details.

Safety & Storage

Store in a cool, dry location between 60–80°F. Keep containers sealed when not in use. Use in well-ventilated areas. Wear appropriate PPE including gloves, eye protection, and respiratory protection as needed. Safety Data Sheets (SDS) available upon request.

View full details